Test Condition:
WARNING: This page is about a different car, the 2004 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
Before performing the following procedure, confirm that battery voltage is more than 11V when engine is running.
WITH CONSULT-II
- Turn ignition switch ON and wait at least 2 seconds.
- Select DATA MONITOR mode with CONSULT-II. See Figure .
- Start engine and let it idle for 5 seconds.
- If DTC is detected, go to DIAGNOSTIC PROCEDURE .
With GST
Follow the procedure WITH CONSULT-II.