Symptom 1 Excessive ABS Function Operation Frequency
- INSPECTION START
Check brake force distribution.
OK or NG
OK >> GO TO 2.
NG >> Check brake system
- FRONT AND REAR AXLE INSPECTION
Make sure there is no excessive play in the front and rear axles.
OK or NG
OK >> GO TO 3.
NG >> Repair.
- WHEEL SENSOR INSPECTION
Wheel Sensor Inspection:
- Sensor mount and damage inspection
- Sensor rotor mount and damage inspection
- Sensor connector connection inspection
- Sensor harness inspection
OK or NG
OK >> GO TO 4.
NG >> Sensor or sensor rotor replacement.
- ABS WARNING LAMP DISPLAY CHECK
Make sure the warning lamp turns off approximately 1 sec. After the ignition switch is turned on or when driving.
OK or NG
OK >> Normal
NG >> Perform self-diagnosis. Refer to "SELF-DIAGNOSIS "