Sunroof Motor Assembly Circuit System Check

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK HARNESS CONTINUITY
1. Turn the ignition switch OFF.
2. Disconnect sunroof switch connector R4 and sunroof motor assembly connector R5.
3. Check continuity between sunroof switch connector R4 terminals 2 (OR) and 3 (L/R) and sunroof motor assembly connector R5 terminals 1 (L/R) and 3 (OR).
  
  Fig 1: Checking Harness Continuity - Sunroof Motor Assembly Circuit System (1 Of 2)
  Courtesy of NISSAN MOTOR CO., U.S.A.
  
  Fig 2: Checking Harness Continuity - Sunroof Motor Assembly Circuit System (2 Of 2)
  Courtesy of NISSAN MOTOR CO., U.S.A.
  
  OK or NG
1. OK: Check harness for short between sunroof switch connector and sunroof motor assembly.
2. NG: Repair or replace harness.