Pattern A

With all doors (including hood and glass hatch) closed, if the key is used to lock doors, smart entrance control unit terminal 33 receives a signal from power window main switch terminal 14. When key cylinder switch is in LOCK position, ground is supplied

to power window main switch terminal 4
from terminal 3 of the front door key cylinder switch LH
through terminal 2 of front door key cylinder switch LH
through body grounds M77 and M111, or

smart entrance control unit terminal 11 receives a ground signal

from terminal 1 of the back door key cylinder switch
through body grounds B11, B22 and D210.

If this signal, or lock signal from keyfob is received by the smart entrance control unit, the vehicle security system will activate automatically.

NOTE: Vehicle security system can be set even though all doors are not locked.