Using CONSULT-II
NOTE:
If DTCs for both ECM and TCM are set. DTCs will need to be erased individually from each control module.
- If ignition is on, turn ignition off and wait at least 10 seconds. Turn ignition on. If DTC is A/T related, go to next step. If DTC is not A/T related, go to step 3.
- Turn CONSULT-II on and press A/T. Press SELF-DIAG RESULTS. Press ERASE. DTC in TCM is now cleared. Press BACK twice.
- Press ENGINE. Press SELF-DIAG RESULTS. Press ERASE. DTC in ECM is now cleared.