DTC Confirmation Procedure
WARNING: This page is about a different car, the 2004 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
Testing condition:
Before performing the following procedure, confirm that battery voltage is more than 10.5V at idle .
With CONSULT-II
- Turn ignition switch ON.
- Select DATA MONITOR mode with CONSULT-II. See Figure .
- Start engine and let it idle for at least 10 seconds.
- If a 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
With GST
Follow the procedure With CONSULT-II above.