October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ECM Inspection Table

Specification data are reference values and are measured between each terminal and ground.

Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: ECM Terminal Specifications (1 Of 9)

G00726931

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Terminal Specifications (2 Of 9)

G00729265

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Terminal Specifications (3 Of 9)

G00729266

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: ECM Terminal Specifications (4 Of 9)

G00729267

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Terminal Specifications (5 Of 9)

G00729268

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Terminal Specifications (6 Of 9)

G00729269

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Terminal Specifications (7 Of 9)

G00729270

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Terminal Specifications (8 Of 9)

G00729271

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: ECM Terminal Specifications (9 Of 9)

G00729272

Courtesy of NISSAN MOTOR CO., U.S.A.