LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> FX45 >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Engine Control System) >> DTC P1564 ASCD Steering Switch >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select DATA MONITOR mode with CONSULT-II. See Figure.
  3. Wait at least 10 seconds.
  4. Press ON/OFF (MAIN) switch for at least 10 seconds, then release it and wait at least 10 seconds.
  5. Press ACCEL/RESUME switch for at least 10 seconds, then release it and wait at least 10 seconds.
  6. Press COAST/SET switch for at least 10 seconds, then release it and wait at least 10 seconds.
  7. Press CANCEL switch for at least 10 seconds, then release it and wait at least 10 seconds.
  8. If DTC is detected, Go to DIAGNOSTIC PROCEDURE .

With GST 

Follow the procedure with CONSULT-II above.

scientia non olet · About LEMON Manuals