Stop Lamp Switch

WARNING: This page is about a different car, the 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect stop lamp switch harness connector.
Check harness continuity between stop lamp switch terminals 1 and 2 under the following conditions.

Fig 1: Testing Stop Lamp Switch
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Stop Lamp Switch Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust stop lamp switch installation, Refer to brake pedal under ON-VEHICLE SERVICE , and perform step 3 again.