Stop Lamp Switch

WARNING: This page is about a different car, the 2004 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect stop lamp switch harness connector. See Figure.
Check continuity between stop lamp switch terminals 1 and 2 under the following conditions.

Fig 1: Testing Stop Lamp Switch Continuity
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Stop Lamp Switch Continuity Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.
If NG, adjust stop lamp switch installation, Refer to brake pedal under ON-VEHICLE SERVICE , and perform step 2 again.