2. Check Overall Function-II

With CONSULT-II 

Check "BRAKE SW2" indication in "DATA MONITOR" mode.

Fig 1: CONSULT-II Display Screen

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: "DATA MONITOR" Parameters

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II 

Check voltage between ECM terminal 101 and ground under the following conditions.

Fig 3: Checking Overall Function-II

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Overall Function-II Test Parameters

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK: INSPECTION END 

NG: GO TO 8 .