2. Check Overall Function-II

WITH CONSULT-II 

Check "BRAKE SW2" indication in "DATA MONITOR" mode.

Fig 1: CONSULT-II Display Screen

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking "BRAKE SW2"

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II 

Check voltage between ECM terminal 101 and ground under the following conditions.

Fig 3: Checking "BRAKE SW2" Voltage

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Checking "BRAKE SW2" Voltage Specifications

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK: GO TO 13.

NG: GO TO 8.