3. Check ASCD Brake Switch Circuit

1. Turn ignition switch OFF.
2. Disconnect ASCD clutch switch harness connector. See Figure.
3. Turn ignition switch ON.
4. Check voltage between ASCD clutch switch terminal 1 and ground with CONSULT-II or tester.
   Fig 1: Checking ASCD Brake Switch Circuit

   Courtesy of NISSAN MOTOR CO., U.S.A.
   Fig 2: ASCD Brake Switch Circuit Test Parameters

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK: GO TO 8 .

NG: GO TO 4.