5) Check ECM Ground Circuit For Open And Short-I
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF.
- Disconnect ECM harness connector.
- Check harness continuity between ECM terminals 1, 115, 116 and engine ground.
Refer to Wiring Diagram.
- Continuity should exist.
- Also check harness for short to power.
OK or NG
- OK: GO TO 6 .
- NG: GO TO 5.