BCM (Body Control Module): Consult-II: Notes
CONSULT-II performs the following functions with combination of data receiving, command and transmission using the CAN communication line from the BCM.
BCM DIAGNOSTIC TEST ITEM
| BCM diagnostic test item | Check item, diagnostic test mode | Content |
|---|---|---|
| Inspection by part | Work support | Changes setting of each function. |
| Self-diagnosis results | BCM performs self-diagnosis of CAN communication and combination switch. | |
| Data monitor | Displays the input data of BCM in real time. | |
| CAN diagnostic support monitor | The result of transmit/receive diagnosis of CAN communication can be read. | |
| Active test | Gives a drive signal to a load to check the operation. |