Component Inspection

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch "OFF". (Stay for at least 5 seconds.)
Remove transfer shut off relay. Refer to "LOCATION OF ELECTRICAL PARTS ".
Apply 12V direct current between transfer shut off relay terminals 1 and 2.

Check continuity between relay terminals 3 and 5.

CONNECTOR TERMINAL CONTINUITY REFERENCE

Condition	Continuity
12V direct current supply between terminals 1 and 2	Yes
OFF	No

Fig 1: Checking Continuity Between Relay Terminals 3 And 5

If NG, replace the transfer shut off relay.