LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Transmission >> Transfer Case >> 2004.5 - Transfer - Sedan >> Trouble Diagnosis >> AWD Control Unit Input/Output Signal Reference Values AWD Control Unit Inspection Table >> Active Test Mode >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test Mode: Description

Use this mode to determine and identify the details of a malfunction based on self-diagnostic results or data monitor. AWD control unit gives drive signal to actuator with receiving command from CONSULT-II to check operation of actuator.

ACTIVE TEST MODE

Test item Condition Description
ETS S/V
(Detects AWD solenoid valve)
  • Vehicle stopped
  • Engine running
  • No DTC detected
  • Change command current value to AWD solenoid, and then change driving mode. (Monitor value is normal if it is within approximately +/-10% of command value.)

    Qu: Increase current value in increments of 0.20 A

    Qd: Decrease current value in increments of 0.20 A

    UP: Increase current value in increments of 0.02 A

    DOWN: Decrease current value in increments of 0.02 A
CAUTION: Do not continuously energize for a long time.
scientia non olet · About LEMON Manuals