ADJUST CURRENT LOCATION Mode

Start the engine.
Push "OPEN/CLOSE" switch and then open the display.
Push "SETTING" switch.
Select "System Setting".
Select "Adjust Current Location".

Fig 1: Adjust Current Location Mode System Setting Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Select "<--" or "-->" to calibrate the heading direction. (Arrow marks will rotate corresponding to the calibration key.)
Select "Set". Then the vehicle mark will be matched to the arrow mark.
Display will show "Heading direction has been calibrated" and then go back to the current location map.

Fig 2: Current Location Display

Courtesy of NISSAN MOTOR CO., U.S.A.