Diagnostic Procedure

With CONSULT-II 

1. Turn ignition switch ON.
2. Select SELF DIAG RESULTS mode with CONSULT-II.
3. Touch ERASE.
4. Perform   . See DTC P0107 P0108 ABSOLUTE PRESSURE SENSOR  .
5. Is the 1st DTC P0107 or P0108 displayed again?

With GST 

1. Turn ignition switch ON.
2. Select MODE 4 with GST.
3. Touch ERASE.
4. Perform   .

   See DTC P0107 P0108 ABSOLUTE PRESSURE SENSOR  .

5. Is the 1st DTC P0107 or P0108 displayed again?

Yes or No 

1. Yes: GO TO 2.
2. No: INSPECTION END 

1. Replace ECM.
2. Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Refer to IVIS (INFINITI VEHICLE IMMOBILIZER SYSTEM - NATS)  .
3. Perform ACCELERATOR PEDAL RELEASED POSITION LEARNING  .
4. Perform THROTTLE VALVE CLOSED POSITION LEARNING  .
5. Perform IDLE AIR VOLUME LEARNING  .

1. : INSPECTION END