Service Specifications
CHARGING SYSTEM SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Generator Model | LR1110-723 | |
| Nominal Rating | 12 Volts, 110 Amps | |
| Minimum Revolution Under No-Load (When 13.5 Volts is Applied) | 1100 RPM | |
| Hot Output Current (When 13.5 volts is Applied) | ||
| At 1300 RPM | 24 Amps | |
| At 1800 RPM | 70 Amps | |
| At 2500 RPM | 91 Amps | |
| At 5000 RPM | 110 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Length of Brush | .236 in. (6.0 mm) | |
| Brush Spring Pressure | 3.60-12.34 ozs. (1.0-3.4 N) | |
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.0 mm) | |
| Rotor (Field Coil) Resistance | 2.16-2.46 Ohms | |