1 Check Input Signal

With CONSULT-II 

1. Start engine.
2. Select "TCM INPUT SIGNALS" in "DATA MONITOR" mode for "A/T" with CONSULT-II.
3. Read out the value of "TURBINE REV". Check the value changes according to engine speed.
   NOTE: "TURBINE REV" in "TCM INPUT SIGNALS" means power train revolution sensor.

Fig 1: Checking Input Signal In Data Monitor Mode With Consult II

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK: GO TO 4.

NG: GO TO 2.