Check ACC Power

With CONSULT-II 

Check ACC power ("ACC ON SW") in "DATA MONITOR" mode with CONSULT-II.

Fig 1: Checking ACC Power With CONSULT-II

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II 

Check voltage between BCM connector and ground.

Fig 2: Checking ACC Power Without CONSULT-II (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Checking ACC Power Without CONSULT-II (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK: ACC power is OK.
2. NG: Check the following.

• 10A fuse [No.21, located in fuse block (J/B)]
• Harness for open or short between BCM and fuse.