October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

1. Check Load Signal Circuit Overall Function-I

Turn ignition switch ON.
Connect CONSULT-II or GST and select "DATA MONITOR" mode.

Fig 1: Scan Tool Display - Data Monitor
Courtesy of NISSAN MOTOR CO., U.S.A.
Select "LOAD SIGNAL" and check indication under the following conditions.

Fig 2: Inspecting Conditions Chart

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: GO TO 2.
NG: GO TO 3. CHECK REAR WINDOW DEFOGGER FUNCTION .