LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> M45 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control System >> Trouble Diagnosis >> Consult-II Function >> Inspection Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Inspection Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector, which is located under LH dash panel near the fuse box cover.
  3. Turn ignition switch ON.
    Fig 1: Locating Data Link Connector
    G00795596Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Touch "START (NISSAN BASED VHCL)".
  5. Touch "ENGINE".

    If "ENGINE" is not indicated, go to  CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT  .

  6. Perform each diagnostic test mode according to each service procedure.

    For further information, see the CONSULT-II Operation Manual. 

scientia non olet · About LEMON Manuals