October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

ECM Inspection Table

Specification Data Are Reference Values And Are Measured Between Each Terminal & Ground. Pulse Signal Is Measured By Consult-II.

CAUTION: Do Not Use Ecm Ground Terminals When Measuring Input/Output Voltage. Doing So May Result In Damage To The Ecm's Transistor. Use A Ground Other Than Ecm Terminals, Such As The Ground.

Fig 1: Inspecting ECM Condition & Voltage Input/Output (1 Of 9)

G00795584

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Inspecting ECM Condition & Voltage Input/Output (2 Of 9)

G00795585

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Inspecting ECM Condition & Voltage Input/Output (3 Of 9)

G00795586

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Inspecting ECM Condition & Voltage Input/Output (4 Of 9)

G00795587

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: Inspecting ECM Condition & Voltage Input/Output (5 Of 9)

G00795588

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: Inspecting ECM Condition & Voltage Input/Output (6 Of 9)

G00795589

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: Inspecting ECM Condition & Voltage Input/Output (7 Of 9)

G00795590

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: Inspecting ECM Condition & Voltage Input/Output (8 Of 9)

G00795591

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: Inspecting ECM Condition & Voltage Input/Output (9 Of 9)

G00795592

Courtesy of NISSAN MOTOR CO., U.S.A.