2. Check Remote Keyless Entry Receiver Output Signal

1. Connect remote keyless entry receiver connector.
2. Check the signal between remote keyless entry receiver connector B246 terminal 2 (BR/W) and ground with oscilloscope.

Fig 1: Checking Remote Keyless Entry Receiver Output Signal (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Remote Keyless Entry Receiver Output Signal (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK: GO TO 3.
2. NG: GO TO 4.