Hazard And Horn Reminder

Power is supplied at all times

• To horn relay terminal 2
• Through 15A fuse (No. 56, located in the fuse, fusible link and relay block).

When BCM receives a LOCK or UNLOCK signal from electronic key, ground is supplied [when specific door switch is ON (specific door is OPEN), BCM does not receive a LOCK signal (BCM receives a UNLOCK signal)]

• To horn relay terminal 1
• Through BCM terminal 127
• Through ground.

When BCM receives a LOCK or UNLOCK signal from electronic key, power is supplied

• To combination flasher unit terminal 6
• Through BCM terminal 7.

Combination flasher unit and security horn relay are now engaged, and hazard warning lamps flash and security horn sounds as a reminder.