Rear View Camera Operation: Notes
When A/T selector lever is in reverse position, power is supplied
- through back-up lamp relay terminal 1
- to TCM terminal 41.
Then back-up lamp relay is energized
- from back-up lamp relay terminal 3
- to rear view camera control unit terminal 10.
Then, rear view camera control unit is sent camera ON signal
- through rear view camera control unit terminal 6
- to rear view camera terminal 1.
An image taken by rear view camera is sent
- through rear view camera terminals 3 and 4
- to rear view camera control unit terminals 18 and 16.
Then an image is sent
- through rear view camera control unit terminals 22 and 24
- to the display terminals 9 and 10.
An image of rear view will be projected on the display.