System Description: Function
SYSTEM DESCRIPTION
| Item | Description |
|---|---|
| Ignition key warning chime | Sounds warning chime when driver's door is opened with key in ignition key cylinder and ignition switch "OFF" or "ACC" position. |
| Light warning chime | Sounds warning chime when driver's door is opened with lighting switch in the 1st or 2nd position and ignition switch "OFF" or "ACC" position. |
| Seat belt warning chime | Sounds warning chime for about 6 seconds if ignition switch is turned "ON" when driver's seat belt is unfastened. |
Power is supplied at all times
- through 10A fuse [No. 3, located in the fuse block (J/B) NO. 1]
- to BCM terminal 105,
- through 10A fuse [No. 6, located in the fuse block (J/B) NO. 1],
- to headlamp battery saver control unit terminal 7,
- to warning chime terminal 1,
- through warning chime terminal 3,
- to BCM terminal 12,
- through 10A fuse [No. 32, located in the fuse block (J/B) No. 2],
- to key switch and key lock solenoid (key switch) terminal 3,
- through 15A fuse [No. 54, located in the fuse, fusible link and relay block (J/B)],
- to tail lamp relay terminals 2 and 6 [located in fuse, fusible link and relay block (J/B)].
With ignition switch in ON or START position, power is supplied
- through 10A fuse [No. 1, located in the fuse block (J/B) No. 1],
- to headlamp battery saver control unit terminal 1,
- to BCM terminal 68.
Ground is supplied
- to BCM terminals 56 and 113
- through grounds M24 and M114.