7. Check Target Idle Speed Again

With CONSULT-II 

1. Start engine and warm it up to normal operating temperature.
2. Read idle speed in "DATA MONITOR" mode with CONSULT-II.
   1. 650 +/- 50 RPM (in P or N position) 

Without CONSULT-II 

1. Start engine and warm it up to normal operating temperature.
2. Check idle speed.
   1. 650 +/- 50 RPM (in P or N position) 

OK or NG 

OK : GO TO 10. CHECK IGNITION TIMING .

NG : GO TO 8.