2. Check FPCM Power Supply Circuit

1. Disconnect fuel pump control module (FPCM) harness connector.
   Fig 1: Locating Fuel Pump Control Module

   Courtesy of NISSAN MOTOR CO., U.S.A.
2. Turn ignition switch ON.
3. Check voltage between FPCM terminal 2 and ground with CONSULT-II or tester.
   1. Voltage: Battery voltage 

OK or NG 

OK: GO TO 4.

NG: GO TO 3.

Fig 2: Checking Voltage Between FPCM Terminal 2 & Ground

Courtesy of NISSAN MOTOR CO., U.S.A.