LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> QX56 AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> G Sensor >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

  1. Remove center console. Refer to CENTER CONSOLE .
  2. Remove yaw rate/side/decel G sensor attaching nuts.
    Fig 1: Torque Specification Of Yaw Rate/Side/Decel G Sensor Attaching Nuts
    G02282012Courtesy of NISSAN MOTOR CO., U.S.A.
    CAUTION:
    • Do not use power tools to remove or install yaw rate/side/decel G sensor.
    • Do not drop or strike the yaw rate/side/decel G sensor.
  3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.
scientia non olet · About LEMON Manuals