LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> QX56 RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Trouble Diagnosis >> CONSULT-II Function >> CONSULT-II Basic Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT-II Basic Operation Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.
  3. Turn ignition switch ON.
    4. Fig 1: Identifying Brake Pedal And Data Link Connector
    G02250699Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Touch "START (NISSAN BASED VHCL)".
    5. Fig 2: CONSULT-II Start Screen
    G02250700Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS" in the "SELECT SYSTEM" screen.

    If "ABS" is not indicated, go to CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT .

    6. Fig 3: CONSULT-II Select System Screen
    G02250701Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Select the required diagnostic location from the "SELECT DIAG MODE" screen. For further information, see the CONSULT-II Operation Manual.
scientia non olet · About LEMON Manuals