Changing Settings Using Display Unit
The settings of the Intelligent Key system can be changed, using CONSULT-II, display unit, Intelligent Key and door request switch in the center of the instrument panel.
CHANGING SETTINGS DESCRIPTION
| Setting item | Description |
|---|---|
| Intelligent Key Lock Response-Sound | The sound pattern of the Intelligent Key operation can be set as desired. (Setting value: OFF, Beeper or Horn chirp) |
| Intelligent Key Unlock Response-Beep Sound | The beep sound when unlocking door with the Intelligent Key operation can be turned ON or OFF. |
| Intelligent Key Engine Start Function | This function can be performed to ON or OFF. |
| Intelligent Key Lock/Unlock Function | The door handle request switch lock/unlock operation with the Intelligent Key can be canceled or activated. |
| Return All Settings to Default | The all settings made by VEHICLE ELECTRONICS will return to default. |
NOTE:
Once a function setting is changed, it will remain effective even if the battery is disconnected.