Check CAN Communication System
- CHECK SELF-DIAGNOSTIC RESULT CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
- Connect CONSULT-II, and turn ignition switch ON.
- Touch "AUTO DRIVE POS." on "SELECT SYSTEM" screen.
- Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
- Check display content in self-diagnostic results.
Displayed U1000?
YES : GO TO "PRECAUTIONS WHEN USING CONSULT-II ".
NO : Inspection END.