CONSULT-II Function: Notes
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-II FUNCTION
| BCM diagnosis position | Inspection items and diagnosis mode | Description | |||
|---|---|---|---|---|---|
| BCM C/U(1) | Self-diagnosis results | Carries out the self-diagnosis. | |||
| DATA MONITOR | CAN diagnosis support monitor | Displays CAN communication system diagnosis, disabled transmission status, and communication status of each unit communicated with BCM. | |||
| Selection from menu | Displays the input data to BCM on real-time basis. | ||||
| MULTI REMOTE ENT | DATA MONITOR | Displays the input data to BCM in real time basis. | |||
| ACTIVE TEST | Gives a drive signal to a load to check the operation. | ||||
| WORK SUPPORT | Changes setting of each function. | ||||
|
|||||