Active Test
ACTIVE TEST ITEM DESCRIPTION
| Test item |
Description |
| DOOR LOCK/UNLOCK |
This test is able to check door lock/unlock operation.
- The all door lock actuators are locked when "LOCK" on CONSULT-II screen is touched.
- The all door lock actuators are unlocked when "ALL UNLK" on CONSULT-II screen is touched.
- The door lock actuator (driver side) is unlocked when "DR UNLK" on CONSULT-II screen is touched.
- The door lock actuator (passenger side) is unlocked when "AS UNLK" on CONSULT- II screen is touched.
- The trunk lid opener actuator is open when "TRUNK OPEN" on CONSULT- II screen is touched.
|
| ANTENNA |
This test is able to check Intelligent Key antenna operation. When the following conditions are met, hazard warning lamps flash.
- Inside key antenna (Instrument center) detects Intelligent Key, when "ROOM ANT1" on CONSULT- II screen is touched.
- Inside key antenna (Center console) detects Intelligent Key, when "ROOM ANT2" on CONSULT- II screen is touched.
- Inside key antenna (rear seat) detects Intelligent Key, when "ROOM ANT3" on CONSULT-II screen is touched.
- Inside key antenna (Trunk room) detects Intelligent Key, when "LAG ANT1" on CONSULT-II screen is touched.
- Outside key antenna (Driver side) detects Intelligent Key, when "DRIVER ANT" on CONSULT-II screen is touched.
- Outside key antenna (Passenger side) detects Intelligent Key, when "ASSIST ANT" on CONSULT- II screen is touched.
- Outside key antenna (Trunk room) detects Intelligent Key, when "BD/TR ANT" on CONSULT-II screen is touched.
|
| OUTSIDE BUZZER |
This test is able to check Intelligent Key warning buzzer operation. Intelligent Key warning buzzer sounds when "ON" on CONSULT-II screen is touched. |
| INSIDE BUZZER |
This test is able to check warning chime into combination meter operation.
- Take away warning chime sounds when "TAKE OUT" on CONSULT-II screen is touched.
- Key warning chime sounds when "KEY WARN" on CONSULT-II screen is touched.
- P position warning chime sounds when "P RNG WARN" on CONSULT-II screen is touched.
- ACC warning chime sounds when "ACC WARN" on CONSULT-II screen is touched.
|
| INDICATOR |
This test is able to check warning lamp operation.
- "KEY" Warning lamp illuminates when "KEY IND ON" on CONSULT-II screen is touched.
- "KEY" Warning lamp flashes when "KEY IND FSH" on CONSULT-II screen is touched.
|
| LCD |
This test is able to check meter display information
- Engine start information displays when "BRAKE/P" on CONSULT-II screen is touched.
- Engine start information displays when "BRAKE/P/ON" on CONSULT-II screen is touched.
- Key ID warning displays when "KEY ID NG" on CONSULT-II screen is touched.
- Steering lock information displays when "STLCK RELES" on CONSULT-II screen is touched.
- P position warning displays when "P RNG IND" on CONSULT-II screen is touched.
- Intelligent Key insert information displays when "INSERT KEY" on CONSULT-II screen is touched.
- Intelligent Key low battery warning displays when "KEY BAT LOW" on CONSULT-II screen is touched.
- Take away from window warning displays when "TK AWAY WDW" on CONSULT-II screen is touched.
- Take away warning display when "TAKE AWAY" on CONSULT-II screen is touched.
- OFF position warning display when "IGN OFF WARN" on CONSULT-II screen is touched.
|
| P RANGE |
This test is able to check A/T device power supply A/T device power is supplied when "ON" on CONSULT-II screen is touched. |
| ENGINE SW ILLUMI |
This test is able to check push-ignition switch illumination operation. Push-ignition switch illumination illuminates when "ON" on CONSULT-II screen is touched. |
| LOCK INDCATOR |
This test is able to check LOCK indicator in push-ignition switch operation. LOCK indicator in push-ignition switch illuminates when "ON" on CONSULT-II screen is touched. |
| ACC INDCATOR |
This test is able to check ACC indicator in push-ignition switch operation. LOCK indicator in push-ignition switch illuminates when "ON" on CONSULT-II screen is touched. |
| IGNITION ON IND |
This test is able to check INGITION ON indicator in push-ignition switch operation. LOCK indicator in push-ignition switch illuminates when "ON" on CONSULT-II screen is touched. |
| KEY SLOT ILLUMI |
This test is able to check key slot illumination operation. Key slot illumination flash when "ON" on CONSULT-II screen is touched. |