Check CAN Communication System
- CHECK SELF-DIAGNOSTIC RESULTS CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which performs CAN communication.
With CONSULT-II
- Connect CONSULT-II, and turn ignition switch ON.
- Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
- Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
- Check display content in self-diagnostic results.
CONSULT-II DISPLAY ITEM AND DTC REFERENCECONSULT-II display item DTC code NO DTC IS DETECTED - CAN COMM U1000 CAN COMM2 U1010 OK or NG
NO DTC IS DETECTED: INSPECTION END
CAN COMM [U1000]: After printing "SELF-DIAGNOSIS RESULTS", go to "CAN SYSTEM", Refer to "PRECAUTIONS WHEN USING CONSULT-II ".
CAN COMM2 [U1010]: Replace Intelligent Key unit.