Terminals and Reference Value for BCM

TERMINALS AND REFERENCE VALUE FOR BCM

Terminal	Wire Color	Item	Condition	Voltage (V) Approx.
11	V	Ignition switch (ACC)	Ignition switch is in ACC or ON position	Battery voltage
12	P	Front door switch passenger side	Door open (ON) --> Close (OFF)	0 --> 8
13	O/L	Rear door switch RH	Door open (ON) --> Close (OFF)	0 --> Battery voltage
37	LG	Key switch signal	Insert Intelligent Key into key slot.	Battery voltage
37	LG	Key switch signal	Remove Intelligent Key from key slot.	0
38	W	Ignition switch (ON)	Ignition switch is in ON or START position.	Battery voltage
39	L	CAN-H	-	-
40	P	CAN-L	-	-
42	P	Power supply (fuse)	-	Battery voltage
52	B	Ground	-	0
55	W	Power supply (Fusible link)	-	Battery voltage
57	SB	Trunk room lamp switch	Trunk lid open (ON) --> Close (OFF)	0 --> Battery voltage
62	V	Front door switch driver side	Door open (ON) --> Close (OFF)	0 --> Battery voltage
63	R/G	Rear door switch LH	Door open (ON) --> Close (OFF)	0 --> Battery voltage
1: In the state that hazard reminder operates. 2: In the state that room lamp switch is in "DOOR" position.