Operation Condition

1. Ignition switch: ON
2. Ignition switch: ACC / Driver side door switch: OFF (CLOSE)

If the following conditions are not satisfied, entry operation is not performed.

• Ignition switch is in OFF position.
• A/T selector lever position is in P position.
• Vehicle speed is less than 7 km/h (4 MPH).
• Driver side power seat switch, ADP steering switch and door mirror control switch are not operated.
• Seat memory switch and set switch is not operated.
• Output malfunction is not detected.
• Detention switch malfunction is not detected.

  [Detention switch malfunction is sensed when detention switch remains OFF and vehicle speed is higher than 7 km/h (4 MPH).]

• CAN communications are normal.
• Exiting positions have not been changed during and after exiting operation.