Inspection Procedure

CHECK SELF-DIAGNOSIS RESULTS
Check self-diagnosis results.
SELF CHECK-DIAGNOSIS TABLE

Self-diagnosis results

RAS CIRCUIT

Is above displayed on the self-diagnosis display?

YES: GO TO 2.

NO: INSPECTION END
CHECK RAS CONTROL UNIT CIRCUIT
1. Perform RAS control unit self-diagnosis. Repair or replace items indicated, then perform RAS control unit self-diagnosis again. Refer to "SELF-DIAGNOSIS PROCEDURE ".
2. Perform ABS actuator and electric unit (control unit) self-diagnosis.
  OK or NG
  
  OK: INSPECTION END
  
  NG:
- Repair or replace malfunctioning components.
- Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED".