INPSECTION Procedure
- . CHECK SELF-DIAGNOSIS RESULTS
Check self-diagnosis results.
SELF CHECK-DIAGNOSIS TABLESelf-diagnosis results 4WD SYSTEM Is above displayed on the self-diagnosis display?
YES: GO TO 2.
NO: INSPECTION END
- CHECK AWD C/U CIRCUIT
- Perform AWD control unit self-diagnosis. Repair or replace items indicated, then perform AWD control unit self-diagnosis again. Refer to "TROUBLE DIAGNOSIS ".
- Perform ABS actuator and electric unit (control unit) self-diagnosis.
OK or NG
OK: INSPECTION END
NG:
- Repair or replace malfunctioning components.
- Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED".