Control When Operating Enable Conditions No Longer Met
WARNING: This page is about a different car, the 2006 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
OPERATING ENABLE CONDITIONS NO LONGER MET SPECIFICATION
| Description | Operation | Control |
|---|---|---|
| Back door close switch turned to CANCEL | Warning chime active --> Shift to manual mode after full open or close operation is complete (Recovery to power mode when main switch turned OFF or door fully closed) |
--> Shift to manual mode |
| A/T selector lever P or N position with ignition switch ON | Warning chime active and one-way operation continuous (Warning chime inactive and door fully open or fully closed or operating conditions recovered) |
Full open: power close operation allowed Full close: operating conditions not met --> no power open function. |
| Voltage drop 11 - 9V | One-way operation continued (equivalent to the case of starting voltage <-- 11V for handle operation with warning chime active) | Not allowed |
| Voltage drop less than 9V (Microcomputer reset voltage - clutch hold voltage) |
|
Control not possible because microcomputer being reset |