Consult-III ECM Reprogramming Procedure (ITB09-019)

Publication date: 2009-04-21
Reference number: ITB09-019

CONSULT-III ECM REPROGRAMMING PROCEDURE

TECHNICAL SERVICE BULLETIN

Reference Number(s): ITB09-019, Date of Issue: April 21, 2009

INFINITI:	All CONSULT-III (C-III) compatible Infiniti vehicles
CLASSIFICATION:	EC09-008
APPLIED VEHICLES:	All CONSULT-III (C-III) compatible Infiniti vehicles

A complete step-by-step General Procedure for C-III ECM Reprogramming is now available by hyperlink.

This General Procedure is also available via hyperlink from specific C-III symptom-based Technical Service Bulletins in ASIST.

CAUTION: BEFORE STARTING REPROGRAMMING

Connect a battery charger to the vehicle battery.
If the 12V battery voltage drops during reprogramming, the ECM may be damaged.
Be sure to turn OFF all vehicle electrical loads.
If a vehicle electrical load remains ON, the ECM may be damaged.
For ECM reprogramming, the C-III MUST be connected to the VI using the USB cable.
Be sure to connect the AC Adapter.
If the C-III battery voltage drops during reprogramming, the process will be interrupted and the ECM will be damaged.