Display Item List
DISPLAY ITEM LIST
| Item (Display or Unit) | Remarks |
|---|---|
| VHCL SPEED SE (km/h) | Vehicle speed received via CAN communication is displayed. |
| STEERING ANG (°) | Steering angle received via CAN communication is displayed. |
| ENGINE SPEED (rpm) | Engine speed received via CAN communication is displayed. |
| POWER STR SOL (A) | Power steering solenoid controlling current that RAS control unit outputs is displayed. |
| RR ST ANG_MAI (V) | Rear wheel steering angle main sensor output voltage is displayed. |
| RR ST ANG_SUB (V) | Rear wheel angle sub sensor output voltage is displayed. |
| RR ST ANG_ VOL (V) | Voltage supplied from RAS control unit to rear wheel steering angle sensor is displayed. |
| C/U VOLTAGE (V) | Voltage supplied to RAS control unit is displayed. |
| MOTOR VOLTAGE (V) | Voltage supplied from RAS control unit to RAS motor is displayed. |
| MOTOR CURRENT (A) | RAS motor relay controlling current that RAS control unit outputs is displayed. |
| MOTOR CRNT OPE (A) | Current commanded value to RAS motor is displayed. |
| RR ANG OPE (°) | Angle commanded value to rear wheel steering angle sensor is displayed. |
| STOP LAMP SW (ON/OFF) | Condition of stop lamp switch ON/OFF is displayed. |
| HICAS RELAY (ON/OFF) | RAS motor relay ON/OFF condition is displayed. |
| FAILSAFE (ON/OFF) | Fail-safe ON/OFF condition is displayed. |
| WARNING LAMP (ON/OFF) | RAS warning lamp operating condition is displayed. |