October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

2WD Models

Loosen nut (2) of pivot pin (1).
Place PNP switch and selector lever in "P" position.
While pressing lower lever (3) toward rear of vehicle (in "P" position direction), tighten nut (2) to specified torque.

Fig 1: Adjusting A/T Position - 2WD Models
Courtesy of NISSAN MOTOR CO., U.S.A.

Refer to "CONTROL ROD COMPONENTS (2WD MODELS) ".