October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

AWD Models

Loosen nut (2) of bracket (1).
Place PNP switch and selector lever in "P" position.

Fig 1: Adjusting A/T Position - AWD Models
Courtesy of NISSAN MOTOR CO., U.S.A.
While pressing lower lever (3) toward rear of vehicle (in "P" position direction), tighten nut (2) to specified torque.
Refer to "CONTROL ROD COMPONENTS (AWD MODELS) ".