Operation that is not "System Error": VDC
- During VDC operation, body and brake pedal lightly vibrate and mechanical noises may be heard. This is normal.
- If vehicle is rotated on turn table, or rolled and rocked on ship, ABS warning lamp, VDC OFF indicator lamp and SLIP indicator lamp may turn on. In this case, start engine on normal road again. If ABS warning lamp, VDC OFF indicator lamp, and SLIP indicator lamp turn off after restart, it is normal.
- When starting TCS or VDC under rapid acceleration or hard turn, operating noise by brake pedal is generated. However, this is not something wrong. This is because TCS and VDC are functioning normally.
- When driving in steep slope such as bank, ABS warning lamp, VDC OFF indicator lamp, and SLIP indicator lamp may turn on. In this case, start engine on normal road again. If ABS warning lamp, VDC OFF indicator lamp and SLIP indicator lamp turn off after restart, it is normal.
- A malfunction oriented Yaw rate / side G sensor may occur under hard turn like spin turn, rapid acceleration turn, drift run, etc. when VDC function is OFF (VDC OFF switch on). It is not something wrong if it is possible to return to a normal position after restarting engine. Then erase the memory of Self-Diagnosis. Refer to "HOW TO ERASE SELF-DIAGNOSTIC RESULTS ".