Inspection Procedure

Check the following if "CAN COMM CIRCUIT" or "ST ANG SEN COM CIR" is detected in self-diagnostic results of CONSULT-II.

CHECK CONNECTOR

Turn ignition switch "OFF".
Disconnect VDC/TCS/ABS control unit connector and steering angle sensor connector. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal.

Securely reconnect connectors and perform self-diagnosis.

SELF-DIAGNOSIS RESULTS

Self-diagnostic results
CAN COMM CIRCUIT
ST ANG SEN COM CIR

Is above displayed in the self-diagnosis display?

YES : Print out self-diagnostic results and go to "PRECAUTIONS WHEN USING CONSULT-II ".
NO : INSPECTION END