LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2006 >> Q45 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> VDC/TCS/Abs >> Trouble Diagnosis >> Control Unit Input/Output Signal Standard >> VDC/TCS/Abs Control Unit Inspection Table >> Specifications with CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Specifications with CONSULT-II

CAUTION: Items displayed are data calculated by control unit and may indicate normal operation even if output circuit (harness) is open or shorted.
CONTROL UNIT INSPECTION REFERENCE

Monitor item Display content Data monitor
NOTE: Error inspection checklist
Condition Reference value in normal operation
N-POSI SIG Conditions of N, R and P position signals N position ON "PARK/NEUTRAL POSITION SWITCH "
Any position other than N OFF
R-POSI SIG When R position ON
Not R position OFF
P-POSI SIG When P position ON
Not P position OFF
GEAR POSITION A/T gear position 1st gear 1 -
2nd gear 2
3rd gear 3
4th gear 4
5th gear 5
VHCL SPEED FR
VHCL SPEED FL
VHCL SPEED RR
VHCL SPEED RL
Wheel speed Vehicle stopped 0 [km/h] "WHEEL SENSOR "
Vehicle running (Note 1) Almost in accordance with speedometer display (within +/-10 %)
THRTL OPENING Throttle actuator opening/closing is displayed (linked with accelerator pedal). Accelerator pedal not depressed (ignition switch is ON) 0% "ENGINE SYSTEM CONTROL SIGNAL "
Depress accelerator pedal (ignition switch is ON) 0 to 100%
ENGINE RPM With engine running With engine stopped 0 rpm
Engine running Almost in accordance with tachometer display
STEERING ANGLE SIG Steering angle detected by steering angle sensor Straight-ahead Approx. 0° "STEERING ANGLE SENSOR "
Steering wheel turned -720 to 720°
YAW RATE SEN Yaw rate detected by yaw rate sensor Vehicle stopped Approx. 0 d/s "YAW RATE/SIDE G SENSOR "
Vehicle running -70 to 70 d/s
SIDE G-SEN Transverse G detected by side G sensor Vehicle stopped Approx. 0 m/s2
Vehicle running -24.3 to 24.1 m/s2
PRESS SENSOR Brake fluid pressure detected by pressure sensor With ignition switch turned ON and brake pedal released Approx. 0 bar "PRESSURE SENSOR "
With ignition switch turned ON and brake pedal depressed -40 to 300 bar
ABS CONT VOLT Battery voltage supplied to VDC/TCS/ABS control unit Ignition switch ON 10 to 16 V "VDC/TCS/ABS CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT "
STOP LAMP SW Brake pedal operation Brake pedal depressed ON "STOP LAMP SWITCH "
Brake pedal depressed OFF
PARK BRAKE SW Parking brake status Parking brake depressed ON "PARKING BRAKE SWITCH "
Parking brake not depressed OFF
OFF SW OFF switch ON/OFF status VDC OFF switch on (When VDC OFF indicator lamp is on) ON "VDC OFF SWITCH "
VDC OFF switch off (When VDC OFF indicator lamp is OFF) OFF
ABS WARN LAMP ABS warning lamp ON condition (Note 2) ABS warning lamp on ON "ABS WARNING LAMP, VDC OFF INDICATOR LAMP, AND SLIP INDICATOR LAMP "
ABS warning lamp off OFF
VDC OFF LAMP VDC OFF indicator lamp status (Note 2) When VDC OFF indicator lamp is on ON
When VDC OFF indicator lamp is off OFF
SLIP LAMP SLIP indicator lamp status (Note 2) When SLIP indicator lamp is ON. ON "ABS WARNING LAMP, VDC OFF INDICATOR LAMP, AND SLIP INDICATOR LAMP "
When SLIP indicator lamp is OFF. OFF
EV SIGNAL-FL
EV SIGNAL-RR
EV SIGNAL-FR
EV SIGNAL-RL
AV SIGNAL-FL
AV SIGNAL-RR
AV SIGNAL-FR
AV SIGNAL-RL
Solenoid valve operation Actuator (solenoid) is active ("ACTIVE TEST" with CONSULT-II). ON "SOLENOID AND VDC SWITCHING VALVE "
When actuator (solenoid) is not active. OFF
USV SIGNAL-P
USV SIGNAL-S
MAV SIGNAL-P
MAV SIGNAL-S
VDC switch-over valve status When actuator (switch-over valve) is active ("ACTIVE TEST" with CONSULT-II). ON
When actuator (switch-over valve) is not active. OFF
M/R OUTPUT Actuator motor and motor relay status (ON/OFF) When actuator motor and motor relay are active ("ACTIVE TEST" with CONSULT-II). ON "ACTUATOR MOTOR AND MOTOR RELAY "
When actuator motor and motor relay are inactive. OFF
FLUID LEV SW Brake fluid level switch status When brake fluid level switch ON. ON "BRAKE FLUID LEVEL SWITCH "
When brake fluid level switch OFF. OFF
Note 1: Confirm tire pressure is normal.
Note 2: ON/OFF timing of warning lamp and indicator lamp. Refer to "ABS WARNING LAMP, VDC OFF INDICATOR LAMP, AND SLIP INDICATOR LAMP ".